Blog
Items to be checked before the concrete mixer truck is driven out
Release time:
2025-01-08
Confirm that the automatic feeding mixer tank is in a stopped state, as if the tank is in a high-speed rotation state when the engine is started, the instantaneous force will be very strong, which will damage the reducer.
Confirm that the automatic feeding mixer tank is in a stopped state, as if the tank is in a high-speed rotation state when the engine is started, the instantaneous force will be very strong, which will damage the reducer.
Make sure there is enough water in the water tank and a water reducing agent. Due to various reasons, if the material is too dry and cannot be discharged without adding water, the water reducing agent becomes a lifesaver.
Before igniting the automatic feeding mixer truck, check the engine oil, antifreeze, lubricating oil, cooling water, etc. If insufficient, it should be refilled.
It is also necessary to check the lighting of the automatic feeding mixer truck, especially the waist light, to ensure that it shines on the edge of the tire. The construction site often piles up steel bars and other things haphazardly, and the tire sidewall is relatively weak.
You should also use a cloth to clean the rearview mirrors and window glass on both sides. The construction site has complex road conditions and poor lighting, so the visibility must be guaranteed.
After starting the car, rotate the can at low speed and check the tire pressure around the car to see if there are any leaking tires. Then use a screwdriver to remove any stones from the tire crevices.
We focus on producing a series of high-performance automatic loading mixer trucks
Contact Us
No. 66, Zhongjiazhuang Industrial Park, Qiwang Road, Qingzhou City, Shandong Province, China
Whatsapp & Wechat